VIDEO 1
Installation
Watch the complete installation guide.
Mount the VORIQUA system on the wall
See how to position and securely mount the system on the shower wall.
Connect the shower and water hoses
See how to remove the existing shower connection, fit the diverter or connector, and connect the system and hoses.
Fill the two reservoirs
Add Body Wash and Shampoo separately to the two independent reservoirs.
VIDEO 2
How to Use
Learn how to start, adjust and restart Foam Mode.
First-time use
On first use, liquid needs to enter the internal tubing. You may need to activate Foam Mode about three times until foam flows normally from the shower head.
Adjust foam density
Adjust the foam density to suit your preference.
Restart Foam Mode after the 20-second cycle
Foam Mode stops automatically after approximately 20 seconds. To continue, switch back to Clear Water, then switch to Foam Mode again to start another cycle.